RW35A Aluminium Slidebed

Vehicle Info

The RW35a SLS slidebed is the top of the range, the most versatile with its excellent loading angle making it ideal for low sports vehicles and vehicles with long overhangs, as well as the run of the mill vehicles. A loading angle of less than 5 degrees may be achieved depending on the chassis used.

This steel or aluminium slidebed body is built for hard work, designed for the 7.5 ton to 18ton chassis range and with its lightweight construction gives a great payload delivering an impressive capacity of from 3.5 ton to 8ton but with the interlocking floor planks makes this a very strong piece of equipment.

RW35 3500kg Slidebed Design & Construction :

  • Aluminium platform
  • Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
  • Galvanised slidebed subframe
  • Galvanised beacon flyer (twin upright posts "H" style frame and mounted either of winch)
  • Large plastic chassis mounted locker
  • 10 deck mounted lashing rings
  • Chassis body locks
  • Electrics :

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps
  • Hydraulics :

  • PTO pump cab mounted air switch
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • 12ft slide off ram
  • Lockable valve spool cabinet
  • Auto tilt on body with manual override lever control
  • Winch control with electro/air hydraulic control
  • Slide body on/off
  • Radio remote for winch
  • General :

  • 1 set of transporter straps
  • 1 years structural warranty
  • Options :

  • Independent 1500 kg capacity Zinc Passivated second car lift with straps
  • Winch radio remote control
  • Radio remote holder with micro switch and buzzer
  • Detachable 50mm towball
  • 4 rotator light bar with illuminated centre (evolution series)
  • 1 pair of spec mounted work lamps
  • Deluxe flyer
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clust
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis
  • Enquire about this Vehicle

    0844 335 1270

    Type Approval

    All our vehicles are subject to Whole Vehicle Type Approval which is an area of EU legislation that applies to the standards of all new recovery vehicles manufactured or sold in the EU. Recovery World works closely with all the relevant authorities (VOSA, VBRA, VCA etc) to ensure that all our new vehicles comply with the latest version of this legislation.

    Vehicle finance available

    We have worked with an independent finance company for a number of years, they have helped many of our customers obtain finance, and whilst they are independent from us, we are happy & confident to recommend their service.