Back to New Vehicles

RW35A Super Low Slider

Vehicle Info

The RW35 SLS slidebed is the top of the range, the most versatile with its excellent loading angle making it ideal for low sports vehicles and vehicles with long overhangs, as well as the run of the mill vehicles. A loading angle of less than 5 degrees may be achieved depending on the chassis used.

This aluminium slidebed body is built for hard work, designed for the 7.5 tonne chassis range and with its lightweight construction gives a great payload delivering an impressive capacity of up to 3.5 tonnes but with the interlocking floor planks makes this a very strong piece of equipment.

 

Enquire about this Vehicle

0844 335 1270 info@recoveryworld.co.uk

RW35 3500kg SLS Design & Construction :

  • 4 degree loading angle depending on chassis and suspension type
  • Platform constructed from interlocking planks for maximum strength
  • Galvanised deluxe beacon flyer
  • Rollers mounted on tip of body, to save on platform wear
  • Body side raves with anti slip tape
  • Large plastic chassis mounted locker
  • 8 deck mounted lashing rings
  • Chassis body locks
  • Thermo plastic wheel arches
  • Stainless steel control box locker

Electrics :

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps
  • Electric / hydraulic emergency stop system
  • LED Side marker lamps
  • 7 Pin electics to rear of vehicle

Hydraulics :

  • Gearbox power take off pump
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • Single main platform slide ram
  • Lockable valve spool cabinet
  • Lever operated winch control

General :

  • 1 set of deluxe transporter straps
  • Subframe shot blasted, primed and finished in single to match chassis
  • Flyer painted to match cab in solid colour
  • Flyer mounted tow ball
  • 1 years structural warranty
  • 1 year mechanical warranty
  • Equipment tested and certified complete with C.E. Mark

Options :

  • Independent 1500 kg capacity Zinc Passivated second car lift with straps
  • Winch radio remote control
  • Radio remote holder with micro switch and buzzer
  • Detachable 50mm towball
  • 4 rotator light bar with illuminated centre (evolution series)
  • 1 pair of spec mounted work lamps
  • Deluxe flyer
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clusters
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis

Type Approval

All our vehicles are subject to Whole Vehicle Type Approval which is an area of EU legislation that applies to the standards of all new recovery vehicles manufactured or sold in the EU. Recovery World works closely with all the relevant authorities (VOSA, VBRA, VCA etc) to ensure that all our new vehicles comply with the latest version of this legislation.

Vehicle finance available

We have worked with CV Finance Ltd for a number of years, they have helped many of our customers obtain finance, and whilst they are independent from us, we are happy & confident to recommend their service.