Gallery & Full Specification
Steel slidebed for 10ton+ chassis.
6000kg Slidebed Design & Construction :
- All steel body with welded treadplate flooring
- Body length up to 7m (23’1”) x 2.5m (8’3”) approx, depending on chassis wheelbase
- Galvanised beacon flyer twin upright posts ‘H’ style frame
- Body side raves with aluminium capping
- Large chassis locker
- 8 deck mounted lashing rings
- Chassis body locks
Electrics :
- 2 rotator light bar with illuminated centre
- 1 pair of flyer mounted work lamps
Hydraulics :
- PTO pump cab mounted air switch
- Chassis mounted hydraulic tank with filter
- 8000lb hydraulic winch
- Twin tilt body rams
- 12ft slide off ram
- Lockable valve spool cabinet
- Winch control
General :
- 1 set of transporter
- Body shot blasted, primed and finished in single colour of customer’s choice
- Subrame shot blasted, primed and paint to match chassis
- 1 years structural warranty
- 1 year mechanical warranty
Options :
- Independent 1500 kg capacity second car lift shot blasted & painted
- Independent 1500 kg capacity second car lift zinc passivated
- Galvanised slidebed subframe
- Winch radio remote control
- Radio remote holder with micro switch and buzzer
- Side winching capstons
- Detachable 50mm towball
- 4 rotator light bar with illuminated centre (evolution series)
- 1 pair of spec mounted work lampsp
- Deluxe flyer
- Wider body with tapered front section (2330 wide instead of 2200 wide)
- Pivot in bed platform for increased loading angle
- Aluminium side under run bars
- Strobe light bar
- Front mounted stobes
- LED rear facing lamp clusters
- Red LED marker lights mounted on flyer
- Side skirts with built in lockers and painted in single colour
- Full operation radio remote
- Aluminium Low approach ramps
- Additional plastic locker
- Steel locker instead of plastic
- Additional steel locker
- Wrecker kit (broom, shovel, cones, small & large crow bar)
- Cones & carrier
- 12V jump socket front & rear with jump leads
- 12 & 24V Jump sockets front & rear with jump leads
- Reel Smart winch system
- Lighting board with fog light storage brackets
- Wheel buggie galvanised storage with 1 pr of buggies
- 7 pin electrics with 12V dropper
- Jerry can and storage
- Paint Cab Only, single solid colour (7.5/10ton GVW)
- Paint Chassis Only, single solid colour (7.5/10ton GVW)
- Flat approach 2nd platform option including:
Twin lifting cylinders
Platform elevation channels
Pneumatic piston locks controlled via switch located at the control box
Aluminium side and centre trims
Front and rear rollers
Painted black, top and underside
Winch rope friction trim - 8ton Capacity body
- Hydraulic load bearing tailgate
- Four round LED lights at rear via smart resister.
- 3 x Second generation strobes fitted in front grill.
- Chrome Wheel Trims, price based on chassis
