RW35A Aluminium Slidebed

Gallery & Full Specification 

 Aluminium slidebed for 7.5ton chassis'. 

  

RW35 3500kg Slidebed Design & Construction :

  • Aluminium platform
  • Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
  • Galvanised slidebed subframe
  • Galvanised beacon flyer (twin upright posts "H" style frame and mounted either of winch)
  • Large plastic chassis mounted locker
  • 10 deck mounted lashing rings
  • Chassis body locks

 

Electrics :   

 

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps

 

Hydraulics :

 

  • PTO pump cab mounted air switch
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • 12ft slide off ram
  • Lockable valve spool cabinet
  • Auto tilt on body with manual override lever control
  • Winch control with electro/air hydraulic control
  • Slide body on/off
  • Radio remote for winch 

General :

  • 1 set of transporter straps
  • 1 years structural warranty

 

Options :

 

  • Independent 1500 kg capacity Zinc Passivated second car lift with straps
  • Winch radio remote control                                                                                      
  • Radio remote holder with micro switch and buzzer
  • Detachable 50mm towball                                                                                      
  • 4 rotator light bar with illuminated centre (evolution series)                                                          
  • 1 pair of spec mounted work lamps                                                                         
  • Deluxe flyer
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clusters
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis