Gallery & Full Specification
Steel slidebed for 7.5ton chassis'.
.jpg)
RW35 3500kg Slidebed Design & Construction :
- All steel body with welded treadplate flooring and fishtailed end
- Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
- Galvanised beacon flyer (twin upright posts ‘H’ style frame & mounted in the
- centre of the body either side of the winch)
- Body side raves with aluminium capping
- Large plastic chassis mounted locker
- 8 deck mounted lashing rings
- Chassis body locks
Electrics :
- 2 rotator light bar with illuminated centre
- 1 pair of flyer mounted work lamps
Hydraulics :
- PTO pump cab mounted air switch
- Chassis mounted hydraulic tank with filter
- 8000lb hydraulic winch
- Twin tilt body rams
- 12ft slide off ram
- Lockable valve spool cabinet
- Winch control
General :
- 1 set of transporter
- Body shot blasted, primed and finished in single colour of customer’s choice
- Subrame shot blasted, primed and paint to match chassis
- 1 years structural warranty
- 1 year mechanical warranty
Options :
- Independent 1500 kg capacity Zinc Passivated second car lift with straps
- Galvanised slidebed subframe
- Winch radio remote
- Radio remote holder with micro switch and buzzer
- Rear LED stop/tail/indicator lamps
- Side winching capstons
- Detachable 50mm towball
- 4 Rotator light bar with illuminted centre section ( Evolution series)
- 1 pair of spec mounted work lamps
- Deluxe flyer
- Wider body with tapered front section (2330 wide instead of 2200 wide)
- Pivot in bed platform for increased loading angle
- Aluminium side under run bars
- Strobe light bar
- Front mounted stobes
- LED rear facing lamp clusters
- Red LED marker lights mounted on flyer
- Side skirts with built in lockers and painted in single colour
- Full operation radio remote
- Aluminium Low approach ramps
- Additional plastic locker
- Steel locker instead of plastic
- Additional steel locker
- Wrecker kit (broom, shovel, cones, small & large crow bar)
- Cones & carrier
- 12V jump socket front & rear with jump leads
- 12 & 24V Jump sockets front & rear with jump leads
- Reel Smart winch system
- Lighting board with fog light storage brackets
- Wheel buggie galvanised storage with 1 pr of buggies
- Go-Jack & Buggies skate ramp galvanized
- 7 pin electrics with 12V dropper
- Jerry can and storage
- Paint Cab Only, single solid colour (7.5/10ton GVW)
- Paint Chassis Only, single solid colour (7.5/10ton GVW)
- Four round LED lights at rear via smart resister.
- 3 x Second generation strobes fitted in front grill.
- Chrome Wheel Trims, price based on chassis
