RW35A Super Low Slider

RW35A Super Low Slider

Gallery & Full Specification 

Super Low Aluminium slidebed for 7.5ton chassis'. 

  

RW35 3500kg SLS Design & Construction :

  • 4 degree loading angle depending on chassis and suspension type
  • Platform constructed from interlocking planks for maximum strength
  • Galvanised deluxe beacon flyer
  • Rollers mounted on tip of body, to save on platform wear
  • Body side raves with anti slip tape
  • Large plastic chassis mounted locker
  • 8 deck mounted lashing rings
  • Chassis body locks
  • Thermo plastic wheel arches
  • Stainless steel control box locker

Electrics :   

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps
  • Electric / hydraulic emergency stop system
  • LED Side marker lamps
  • 7 Pin electics to rear of vehicle

Hydraulics :

  • Gearbox power take off pump
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • Single main platform slide ram
  • Lockable valve spool cabinet
  • Lever operated winch control

General :

  • 1 set of deluxe transporter straps
  • Subframe shot blasted, primed and finished in single to match chassis
  • Flyer painted to match cab in solid colour
  • Flyer mounted tow ball
  • 1 years structural warranty
  • 1 year mechanical warranty
  • Equipment tested and certified complete with C.E. Mark

Options :

  • Independent 1500 kg capacity Zinc Passivated second car lift with straps
  • Winch radio remote control                                                                                      
  • Radio remote holder with micro switch and buzzer
  • Detachable 50mm towball                                                                                      
  • 4 rotator light bar with illuminated centre (evolution series)                                                          
  • 1 pair of spec mounted work lamps                                                                         
  • Deluxe flyer
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clusters
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis