New Recovery Vehicles & Equipment

RW35 Aluminium Slidebed

Gallery & Full Specification 

 Aluminium slidebed for 7.5ton chassis'. 

Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
  

RW35 3500kg Slidebed Design & Construction :

  • Aluminium platform
  • Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
  • Galvanised slidebed subframe
  • Galvanised beacon flyer (twin upright posts "H" style frame and mounted either of winch)
  • Large plastic chassis mounted locker
  • 10 deck mounted lashing rings
  • Chassis body locks

 

Electrics :   

 

  • 2 rotator light bar with illuminated centre
  • 1 pair of flyer mounted work lamps

 

Hydraulics :

 

  • PTO pump cab mounted air switch
  • Chassis mounted hydraulic tank with filter
  • 8000lb hydraulic winch
  • Twin tilt body rams
  • 12ft slide off ram
  • Lockable valve spool cabinet
  • Auto tilt on body with manual override lever control
  • Winch control with electro/air hydraulic control
  • Slide body on/off
  • Radio remote for winch 

General :

  • 1 set of transporter straps
  • 1 years structural warranty

 

Options :

 

  • Independent 1500 kg capacity Zinc Passivated second car lift with straps
  • Winch radio remote control                                                                                      
  • Radio remote holder with micro switch and buzzer
  • Detachable 50mm towball                                                                                      
  • 4 rotator light bar with illuminated centre (evolution series)                                                          
  • 1 pair of spec mounted work lamps                                                                         
  • Deluxe flyer
  • Aluminium side under run bars
  • Strobe light bar
  • Front mounted stobes
  • LED rear facing lamp clusters
  • Red LED marker lights mounted on flyer
  • Side skirts with built in lockers and painted in single colour
  • Full operation radio remote
  • Aluminium Low approach ramps
  • Additional plastic locker
  • Steel locker instead of plastic
  • Additional steel locker
  • Wrecker kit (broom, shovel, cones, small & large crow bar)
  • Cones & carrier
  • 12V jump socket front & rear with jump leads
  • 12 & 24V Jump sockets front & rear with jump leads
  • Reel Smart winch system
  • Lighting board with fog light storage brackets
  • Wheel buggie galvanised storage with 1 pr of buggies
  • Go-Jack & Buggies skate ramp galvanized
  • 7 pin electrics with 12V dropper
  • Jerry can and storage
  • Paint Cab Only, single solid colour (7.5/10ton GVW)
  • Paint Chassis Only, single solid colour (7.5/10ton GVW)
  • 3 x Second generation strobes fitted in front grill.
  • Chrome Wheel Trims, price based on chassis
 
http://www.london-web-design.co/