Gallery & Full Specification

Steel slidebed for 7.5ton chassis'.

RW35 3500kg Slidebed Design & Construction :

• All steel body with welded treadplate flooring and fishtailed end
• Body length up to 21’ (6.4m) approx, depending on chassis wheelbase
• Galvanised beacon flyer (twin upright posts ‘H’ style frame & mounted in the
• centre of the body either side of the winch)
• Body side raves with aluminium capping
• Large plastic chassis mounted locker
• 8 deck mounted lashing rings
• Chassis body locks

Electrics :   

• 2 rotator light bar with illuminated centre
• 1 pair of flyer mounted work lamps

Hydraulics :

• PTO pump cab mounted air switch
• Chassis mounted hydraulic tank with filter
• 8000lb hydraulic winch
• Twin tilt body rams
• 12ft slide off ram
• Lockable valve spool cabinet
• Winch control

General :

• 1 set of transporter
• Body shot blasted, primed and finished in single colour of customer’s choice
• Subrame shot blasted, primed and paint to match chassis
• 1 years structural warranty
• 1 year mechanical warranty 

Options :

• Independent 1500 kg capacity Zinc Passivated second car lift with straps
• Galvanised slidebed subframe
• Winch radio remote
• Radio remote holder with micro switch and buzzer
• Rear LED stop/tail/indicator lamps
• Side winching capstons
• Detachable 50mm towball                                                                                      
• 4 Rotator light bar with illuminted centre section ( Evolution series)
• 1 pair of spec mounted work lamps                                                                         
• Deluxe flyer
• Wider body with tapered front section (2330 wide instead of 2200 wide)               
• Pivot in bed platform for increased loading angle
• Aluminium side under run bars
• Strobe light bar
• Front mounted stobes
• LED rear facing lamp clusters
• Red LED marker lights mounted on flyer
• Side skirts with built in lockers and painted in single colour
• Full operation radio remote
• Aluminium Low approach ramps
• Additional plastic locker
• Steel locker instead of plastic
• Additional steel locker
• Wrecker kit (broom, shovel, cones, small & large crow bar)
• Cones & carrier
• 12V jump socket front & rear with jump leads
• 12 & 24V Jump sockets front & rear with jump leads
• Reel Smart winch system
• Lighting board with fog light storage brackets
• Wheel buggie galvanised storage with 1 pr of buggies
• Go-Jack & Buggies skate ramp galvanized
• 7 pin electrics with 12V dropper
• Jerry can and storage
• Paint Cab Only, single solid colour (7.5/10ton GVW)
• Paint Chassis Only, single solid colour (7.5/10ton GVW)
• Four round LED lights at rear via smart resister.
• 3 x Second generation strobes fitted in front grill.
• Chrome Wheel Trims, price based on chassis